Miele G 6993 Operating Instructions Manual Download Page 45

Page: 45 / 104

Operation

Switching on



Open the stopcock, if it is closed.



Open the door.



Make sure the spray arms can rotate
freely.



Switch the dishwasher on using the



sensor.

The main menu will appear in the
display.

Switch the

Memory

function on (see

"Settings menu, Memory") if you want
the last programme used to appear in
the display instead of the main menu.

Selecting a programme

Choose your programme according to
the type of load and how dirty it is.

The different programmes and their
uses are described in the

Programme

chart

later on in this booklet.



Use the



arrow buttons to select a

programme and confirm with the

button.

The display will change to show the
programme menu.

Touch the



sensor to access more

information about the programme
currently selected.

You can now select extra options for
your programme (see "Programme
options").

To select a different programme, touch
the



sensor to return to the main

menu.

Summary of Contents for G 6993









































































































Search results

Summary of Contents for G 6993

Reviews:

Related manuals for G 6993

Brands by name

Popular brands

Miele G 6993, Operating Instructions Manual

Search results

Summary of Contents for G 6993

Reviews:

Related manuals for G 6993

Brands by name

Popular brands