Miele G 1830 Page 7 Operating Instructions Manual Download

Page: 7 / 88

Display

The display is used to select the
following:

– the programme
– extras
– the delay start time
– the "Settings

" menu

During a programme, the display
shows the following:

– the name of the programme
– the current time of day
– the stage the programme is at
– the estimated time left for the

programme to run

– any relevant fault messages and

notes

A dot in the display next to a selector
sensor pad indicates that a function
can be selected with that sensor pad.

The arrows on the right hand of the
display indicate that more options or
more text are available which can be
displayed with the relevant selector
sensor pad.

The

function is used to confirm a

message or setting and also to move to
the next menu or to another level.

The "Settings

" menu is used to alter

the dishwasher’s electronics to suit
different requirements. See "Settings
menu" for more details.

Description of the appliance

Summary of Contents for G 1830

























































































Search results

Summary of Contents for G 1830

Reviews:

Related manuals for G 1830

Brands by name

Popular brands

Miele G 1830, Operating Instructions Manual

Search results

Summary of Contents for G 1830

Reviews:

Related manuals for G 1830

Brands by name

Popular brands