manualshive.com logo in svg

Miele G 1830, Operating Instructions Manual, Page: 6 / 88

Share
Download
Miele G 1830 Operating Instructions Manual Download Page 6

Control panel

a

Information sensor pad

K

For displaying additional information
about the menu being displayed.

b

On/Off sensor pad

s

For switching the appliance on and
off.

c

Selector sensor pads

For selecting options displayed next
to them.
For altering the values displayed
(+/-).
For moving to other screens.

d

Display

See the following pages for more
information.

e

Stand-by indicator light

When the dishwasher is switched on,
the indicator light comes on if the
display is switched off.

f

+

C (Clear) sensor pad

For returning to the previous menu or
deleting values which have been set
previously.

g

Service interface

Used by service technicians to run
diagnostic checks, or to update
programming data in the future.

h

Miele

{

home

The appliance is compatible with the
Miele

|

home system.

This instruction book applies to several different dishwasher models.
The specific dishwasher models below are referred to as follows:
G 1830 = G 1XXX
G 2830 = G 2XXX

The model numbers G 1XXX and G 2XXX used in this book refer to the model
designation specified on the data plate of the appliance (and not the
description on the control panel).
The data plate is located at the top right hand side of the door.

Description of the appliance

6

Summary of Contents for G 1830

























































































Reviews:

No comments