Miele G 1830 Operating Instructions Manual Download Page 35

Page: 35 / 88

Switching on

Make sure the spray arms are not obstructed.

Close the door.

Open the stopcock, if it is closed.

Switch the dishwasher on with the On/Off sensor pad

The main menu will appear in the display.
If the memory function is activated, the programme menu for
the programme last selected will be displayed instead (see
"Settings menu

, Memory").

Main menu

12:00

Sensor wash

Quick wash

40°C

Sensor wash gentle

Selecting a programme

Choose your programme according to the type of load and
how dirty it is.

The different programmes and their uses are described in the
programme chart later on in this booklet.

Pressing the

sensor pad will call up some information

about the programme currently selected.

Select the programme you want.

The display will change to show the programme menu.

Sensor wash

1:32 h

12:00

Extras

Start time

Finish at

13:32

Start

Operation

Summary of Contents for G 1830

























































































Search results

Summary of Contents for G 1830

Reviews:

Miele G 1830, Operating Instructions Manual, Page: 35 / 88

Search results

Summary of Contents for G 1830

Reviews: