![background image](http://html.mh-extra.com/html/miele/g-1830/g-1830_operating-instructions-manual_234631049.webp)
The dishwasher does not fill/drain
Problem
Possible cause
Remedy
The buzzer sounds.
The following fault
message appears in
the display:
Water inlet fault
Please open the
stopcock.
The stopcock is closed. Open the stopcock fully.
Water inlet fault FXX
Before rectifying the problem
you must:
–
Switch the dishwasher off
with the On/Off sensor pad
s
.
Fault F12/F13:
Water inlet restricted.
–
Open the stopcock fully and
start the programme again.
–
Clean the water inlet filter
(see "Problem solving").
–
The water pressure at the
intake is lower than 30 kPa
(0.3 bar).
Seek professional advice.
Problem solving guide
49
Summary of Contents for G 1830
Page 85: ...85 ...
Page 86: ...86 ...
Page 87: ...87 ...
Page 88: ...Alteration rights reserved G1830 G2830 1106 M Nr 06 702 790 02 en GB ...