Miele G 1830 Operating Instructions Manual Download Page 36

Page: 36 / 88

Selecting an Extra

You can now select Extras for the programme selected.

Select the

Extras

menu option.

The Extras available for the programme selected will appear
in the display.

The Extras are:

Pre-wash:

– For removing loose soiling.

Soak:

– For soaking and softening dried on soiling.

If you are using powder dishwasher detergent, add
approx. 5 g to compartment I.

Longer drying:

– For improved drying of awkwardly shaped dishes and also

plastic items.

Extras

12:00

° §

Longer drying

Select the Extras you want.

A tick

will appear beside the Extra to show that it has been

set.

To de-select an Extra, press the appropriate selector
sensor pad again.

When you have finished selecting Extras, confirm with

The display will change back to the programme menu.
The message

Extras selected

will appear in the display.

Operation

Summary of Contents for G 1830

























































































Search results

Summary of Contents for G 1830

Reviews:

Miele G 1830, Operating Instructions Manual, Page: 36 / 88

Search results

Summary of Contents for G 1830

Reviews: