Miele G 1830 Page 84 Operating Instructions Manual Download

Page: 84 / 88

Demo programme

For showrooms only

The dishwasher is fitted with three
demonstration programmes for
showroom use.

The "Demo programme" and "Demo in
continuous loop" programmes
demonstrate operation and functions.

–

Demo programme

This programme is started by
pressing any sensor pad. It will run
through once and then has to be
started again.

–

Demo in continuous loop

This programme will begin as soon
as you switch it on and then will play
in a continuous loop until you switch
it off.

–

Demo with sound

This programme activates the pumps
to demonstrate the sound of the
dishwasher.

Switching on a demo programme

Select the option you want and
confirm with

Confirm

Switch demo programme

on?

with

Press any sensor pad to start the
Demo programme you have
selected.

To cancel it, press any sensor pad
and confirm with it with

Switching off the Demo programme

Select the

Off

option and confirm

with

Confirm

Switch demo programme

off?

with

Factory default

If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings.

Confirm the question

Reset factory

default settings?

with

Confirm the information message

All

settings reset to factory default.

with

To close the "Settings

" menu

Press the

C sensor pad to come out

of the "Settings

" menu and return to

the main menu.

Settings menu

Summary of Contents for G 1830

























































































Search results

Summary of Contents for G 1830

Reviews:

Related manuals for G 1830

Brands by name

Popular brands

Miele G 1830, Operating Instructions Manual

Search results

Summary of Contents for G 1830

Reviews:

Related manuals for G 1830

Brands by name

Popular brands