![background image](http://html2.mh-extra.com/html/v-zug/adora-slq-267/adora-slq-267_installation-instructions_3115282001.webp)
Installation instructions
Washing machine «Front loader»
One-family household
J267.370-0
25.6.09 ITH
1
For Service and Spare Part Information please contact:
Manfred Schulz, Technical Manager
V-ZUG AUSTRALIA PTY LTD, c/o C.W. Stirling
6th floor 90 William Street, Melbourne, VIC 3000
[email protected]
Tel/ Fax +61 3 9723 5790, Mob +61 400 088336
These installation instructions apply to the model:
267
A
Open the drain tray – at bottom front of appliance – by
pressing it at the top.
–
The identification plate is located on the right-hand side
next to the foreign body trap.
The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order
specified.
Validity
Identification plate
Installation accessories supplied
The installation set W3.6278 includes:
The installation set is located in the drum of the washing machine
and can be taken out after opening the appliance door (see first
installation step).
Article
Number See installation step
Installation plate (W3.8503)
incl. screw material (
S
)
Rubber stoppers
3
2. Remove the transportation locks
Combination spanner
1
2. Remove the transportation locks
4. Levelling
Double-sided adhesive tape
1
3. Positioning the installation plate
Exterior drain hose
1
5. Plumbing in
Wire hose clamp
1
Hose clip
1
Installation
Work steps 1–7 must be carried out in full in the order specified.
1. Open the appliance door (without power)
A
Open the drain tray
A
– at
bottom front of appliance –
by pressing it at the top.
A
Fold the drain tray
A
right
down and remove it.
A
Remove emergency
release tool
B
from its
bracket.
Right door opening
Left door opening
A
Insert the tool into the opening and turn in the direction
of the arrow (see arrow on appliance).
S
A
A
B