Supervisor level
97
Only cold water is used for the main
wash.
– hot
Hot water is also added for the main
wash.
Hot water can only be added if the
wash temperature is above 30°C.
If the washing machine is not
connected to hot water, programme
durations will be longer and may
deviate from the remaining runtimes
displayed.
First rinse
You can select the water type for the
first rinse in some programmes.
– cold (factory setting)
Only cold water is used for the first
rinse.
– hot
Hot water is also added to the first
rinse.
Final rinse
You can select the water type for the
final rinse in some programmes.
– cold (factory setting)
Only cold water is used for the final
rinse.
– hot
Hot water is also added for the final
rinse (only possible for programmes
with a temperature of at least 60°C).
Low water pressure
If the water pressure is below 100 kPa
(1 bar), the programme will be
cancelled and the fault message
Check water inlet
will appear.
If the on-site water pressure cannot be
increased, activating the
Low water
pressure
setting will prevent the
programme from being cancelled.
Factory setting: No
Automatic dispensing
Automatic dispensing via an external
dispensing system can be activated
Factory setting: Off
