Miele 11289940 Operating And Installation Instructions Download Page 34

Page: 34 / 104

Timer

The Timer can be used to select the
time at which a programme starts or
finishes.

Setting the Timer



Touch the

 Timer

sensor.



Select the

Finish at

Start in

Start at

option.



Set the hours and the minutes and
confirm your entry with the

sensor.

Changing the Timer

The selected delay start time can be
changed before the programme starts.



Touch the







sensor.



Change the time set and confirm with
the

sensor.

Deleting the Timer

The selected delay start time can be
cancelled before the programme starts.



Touch the







sensor.

The selected delay start time will
appear in the display.



Touch the

Delete

sensor.



Confirm with the

sensor.

The selected delay start time is deleted.

Starting the Timer



Touch the

Start/Stop

sensor.

The door will lock and the time
remaining until the programme starts
will appear in the display.

After the programme has started, the
selected time can only be changed or
cancelled by interrupting the
programme.

The programme can be started
immediately at any time.



Touch the

Start immediately

sensor.

Summary of Contents for 11289940









































































































Search results

Summary of Contents for 11289940

Reviews:

Related manuals for 11289940

Brands by name

Popular brands

Miele 11289940, Operating And Installation Instructions

Search results

Summary of Contents for 11289940

Reviews:

Related manuals for 11289940

Brands by name

Popular brands