Supervisor level
95
Remote
Programmes are selected on an
external terminal.
Factory setting: On
RemoteUpdate
The RemoteUpdate function is used for
updating the software in your washing
machine.
The RemoteUpdate function is
deactivated as standard.
If you do not install a RemoteUpdate,
you can continue to use your washing
machine in the usual way. However,
Miele recommends installing
RemoteUpdates.
Activation
The RemoteUpdate menu option is
only displayed and can only be
selected if you have integrated your
washing machine into your Wi-Fi
network.
Miele’s RemoteUpdate function can
only be used if the washing machine is
connected to a Wi-Fi network and you
have an account in the Miele
Professional App. The washing machine
must be registered with your account in
the app.
See the Miele Professional App for
terms and conditions of use.
Some software updates can only be
carried out by a Miele service
technician.
Running a RemoteUpdate
If a RemoteUpdate is available for your
washing machine, it will be displayed
automatically in the open Supervisor
level.
You can choose to start the
RemoteUpdate immediately or wait until
later. If you select “Start later”, the
prompt to run the RemoteUpdate will
be displayed again the next time you
switch on your washing machine.
The RemoteUpdate can take several
minutes.
Please note the following information
about the RemoteUpdate function:
– You will only receive a message when
a RemoteUpdate is available.
– Once a RemoteUpdate has been
installed, it cannot be undone.
– Do not switch off the washing
machine during a RemoteUpdate.
Otherwise, the RemoteUpdate will be
aborted and will not be installed.
