Miele 11289940 Operating And Installation Instructions Download Page 19

Page: 19 / 104

Operating the washing machine

Operating the laundrette
version

The entry menu will vary depending on
the programming status (see
“Supervisor level - Controls”).

Shortcuts are the easiest way to
operate the machine. Operators cannot
change the preset programmes.

Laundrette basic (4 programmes)



11:02









Coloured
items

Woollens

Delicates

Minimum iron

Help

4 preset programmes are available.
These cannot be changed by the
operator.

Laundrette extended (12
programmes)



11:02







Coloured

items

Woollens

Minimum iron

Help

Further



Up to 12 preset programmes are
available. The first three programmes
can be selected directly. The remaining
programmes are selected via another
list. These cannot be changed by the
operator.

Summary of Contents for 11289940









































































































Search results

Summary of Contents for 11289940

Reviews:

Related manuals for 11289940

Brands by name

Popular brands

Miele 11289940, Operating And Installation Instructions

Search results

Summary of Contents for 11289940

Reviews:

Related manuals for 11289940

Brands by name

Popular brands