Miele 11289940 Operating And Installation Instructions Download Page 28

Page: 28 / 104

4. Selecting programme settings

Selecting the load

To enable load specific dispensing,
you can specify the load for some
programmes.



Touch the

Weight

sensor.



Enter a valid value for the load
quantity.

The display will change to show the

Overview

menu.

Selecting the temperature

You can alter the preset temperature
of the wash programme.



Touch the

Temperature

sensor.



Select the desired temperature.

The display will change to show the

Overview

menu.

Selecting a spin speed

You can alter the preset spin speed of
the wash programme.



Touch the

Spin speed

sensor.



Select the desired spin speed.

The display will change to show the

Overview

menu.

Selecting Extras

You can select Extras for some wash
programmes.



Touch the

Extras

sensor.



Select one or more Extras.



Confirm with the

sensor.

The display will change to show the

Overview

menu.

See “Extras” for further information.

Activating CapDosing

You can use CapDosing for some
wash programmes.



Touch the

CapDosing

sensor.

The types of capsules which can be
used with the programme will be shown
in the display.



Select the type of capsule you want
to use.

CapDosing is now active.

The display will change to show the

Overview

menu.

See “5. Adding detergent -
CapDosing” for more information.

Summary of Contents for 11289940









































































































Search results

Summary of Contents for 11289940

Reviews:

Related manuals for 11289940

Brands by name

Popular brands

Miele 11289940, Operating And Installation Instructions

Search results

Summary of Contents for 11289940

Reviews:

Related manuals for 11289940

Brands by name

Popular brands