Miele 11289940 Operating And Installation Instructions Download Page 83

Page: 83 / 104

Supervisor level

Opening the Supervisor level



Switch on the washing machine.



11:02







Programmes

Favourites

Supervisor

Help



Touch the

Supervisor



sensor.

The display will change to show the

Supervisor level

menu.

Code-based access

The Supervisor level is accessed using
a code.

The code is

000

(factory default).

Changing the code

You can change the Supervisor level
access code to protect the washing
machine from unauthorised access.

Please inform Miele if you have
forgotten your new code. Miele will
have to reset the code.
Make a note of your new code and
store it in a safe place.

Closing the settings menu



Touch the



sensor control.

The display will go back to the previous
menu level.



Touch the



sensor control.

The display will change to the main
menu.

Summary of Contents for 11289940









































































































Search results

Summary of Contents for 11289940

Reviews:

Related manuals for 11289940

Brands by name

Popular brands

Miele 11289940, Operating And Installation Instructions

Search results

Summary of Contents for 11289940

Reviews:

Related manuals for 11289940

Brands by name

Popular brands