Midway Cruis'n Exotica, Operation Manual

Page: 52 / 109

Service - 8
To service the Control Cabinet…
Refer to the Control Cabinet Service illustration.
Ø
Switch off the power to the game machine and unplug the AC line cord.
Ø
Remove the tamper resistant screws from either side of the control cabinet used to fasten it to
the cabinet brackets in the main cabinet.
Ø
Slide the control cabinet halfway back along the rails to expose wiring. Label and disconnect
all wiring.
Ø
Continue to slide the cabinet away from the main cabinet until it clears the mounting rails.
Ø
Perform the desired repair or equipment replacement.
Control Cabinet Service
To service the Dashboard…
Refer to Dashboard Service illustration.
Ø
Switch off the power to the game machine and unplug the AC line cord.
Ø
Remove the Control Cabinet. Refer to service instructions for Control Cabinet.
Ø
Remove the tamper resistant screws from the molded control cabinet cover. Lift the lid off of the
cabinet and set aside in a safe place.
Ø
Label and disconnect all dash wiring, including the ground strap.
Ø
Remove the four screws used to fasten the Dashboard to the cabinet.
Ø
Firmly grab the dash and pull it straight out.
NOTE: The Dashboard is heavy, with most of the weight concentrated in the center near the
Steering Mechanism.
Ø
Perform the desired repair or equipment replacement.
Ø
To reinstall, line-up the holes on either side of the Dashboard and push straight back.
Ø
Check for pinched wires, and then reconnect dash wiring and ground strap.
Ø Fasten in place with the screws provided.