Midway Cruis'n Exotica, Operation Manual

Page: 57 / 109

Service - 13
Keypad Service, continued
Ø
Lift the keypad out.
Ø
Perform the desired repair or equipment replacement.
Ø
Reinstall keypad, seat the spacers and fasten in place with the nuts provided.
Ø
Reinstall Dashboard and fasten with hardware provided.
Keypad Service
To service Control Cabinet Speaker…
This speaker is located just above the pedal assembly.
Ø
Switch off the power to the game machine and unplug the AC line cord.
Ø
Remove the Control Cabinet. Refer to service instructions for Control Cabinet.
Ø
Label and disconnect wiring, including the ground strap.
Ø
Remove the nuts on the mounting screws before removing the speaker from the enclosure.
Ø
Perform the desired repair or equipment replacement.
Ø
Carefully reseat the seals upon completing any task in the speaker enclosure.
Ø
Reconnect the wires, including ground. Refer to the Cabinet Wiring Diagram for correct speaker
polarity.
To service Pedal Assembly…
Ø
Switch off the power to the game machine and unplug the AC line cord.
Ø
Remove the Control Cabinet. Refer to service instructions for Control Cabinet.
Ø
Adjust the seat to the maximum rear position.
Ø
Remove 4 tamper resistant screws used to fasten the Pedal assembly to the cabinet. NOTE:
Due to the weight of the pedal assembly it may slide or abruptly jerk out of the opening once all
screws are loosened and/or removed.
Ø
Pull the assembly forward enough to expose wiring.
Ø
Carefully note the orientation of the cable wiring. Label and disconnect wiring, including ground.
Ø
Perform the desired repair or equipment replacement.
Ø
Reinstall pedal assembly and reconnect wiring, including ground.
Ø
Align the holes for the screws and fasten in place with the hardware provided.