Midway Cruis'n Exotica, Operation Manual

Page: 55 / 109

Service - 11
Control Pod, Buttons and Shifter Service
To service View Buttons…
Refer to the Control Pod, Buttons and Shifter Service illustration.
Ø
Switch off the power to the game machine and unplug the AC line cord.
Ø
Remove the 4 tamper-resistant buttons used to fasten the faceplate.
Ø
Pull the plate forward enough to expose the switches.
Ø
Label and disconnect the wiring for the pod(s) being serviced.
Ø
Lift assembly completely out of the pod and set aside.
Ø
Perform the desired repair or equipment replacement.
Ø
Reconnect wires and reinstall buttons. NOTE: Insert the left edge of the button plate, then the
right edge to fully seat.
Ø
Check for pinched wires.
Ø
Fasten the faceplate with the screws provided.
To service Shifter…
Refer to the Control Pod, Buttons and Shifter Service illustration.
Ø
Switch off the power to the game machine and unplug the AC line cord.
Ø
Remove the 4 tamper-resistant buttons used to fasten the faceplate.
Ø
Pull the plate forward enough to expose the switches. NOTE: Pulling the shifter out of the pod
requires quite a bit of force.
Ø
Label and disconnect the wiring for the pod(s) being serviced.
Ø
Lift assembly completely out of the pod and set aside.
Ø
Perform the desired repair or equipment replacement.
Ø
Reconnect wires and reinstall shifter. NOTE: Orient the spring mechanism located on the
bottom edge of the shifter toward the bottom of the pod and insert it followed by the top edge to
fully seat.
Ø
Check for pinched wires.
Ø
Fasten the faceplate with the screws provided.