![background image](http://html1.mh-extra.com/html/midea/tm05k6bw-p/tm05k6bw-p_instruction-manual_1791428032.webp)
32
B6. MOUNT THE MICROWAVE OVEN
FOR EASIER INSTALLATION AND PERSONAL SAFETY, WE RECOMMEND
THATTWO PEOPLE INSTALL THIS MICROWAVE OVEN.
IMPORTANT: Do not grip or use the handle or heat shield during installation. Do not
remove the cardboard spacers between the heat shield and door.
NOTE: If your cabinet is metal, use the nylon grommet around the power cord hole to
prevent cutting of the cord.
NOTE: We recommend using filler blocks if the cabinet front hangs below the cabinet
bottom shelf.
IMPORTANT: If filler blocks are not used, case damage may occur from overtightening
screws.
NOTE: When mounting the microwave oven, thread
power cord through hole in bottom of top cabinet. Keep
it tight throughout Steps 1–3. Do not pinch cord or
lift oven by pulling cord.
1. Lift microwave, tilt it forward, and hook
slots at back bottom edge onto four lower
tabs of mounting plate.
2. Rotate front of oven up against cabinet
bottom.
3. Insert a self-aligning screw through top center cabinet hole. Temporarily secure the oven
by turning the screw at least two full turns after the threads have engaged. (It will be
completely tightened later.) Be sure to keep power cord tight. Be careful not to pinch the
cord, especially when mounting flush to bottom of cabinet.