![background image](http://html1.mh-extra.com/html/midea/tm05k6bw-p/tm05k6bw-p_instruction-manual_1791428023.webp)
23
A5. INSTALLING OR CHANGE THE CHARCOAL FILTER (Some Models)
NOTE: The charcoal filter is factory installed in some models. Refer to the Use and Care
to see if yours is factory installed and for replacement information.
For models without the recirculation filter access door,follow these steps to replace or
install a charcoal filter.
A5.1 Unplug microwave oven or disconnect power.
A5.2 Open the microwave door and remove the two vent mounting screws located on top of
the microwave using a #1 Phillips screwdriver.
A5.3 Remove the charcoal filter by pushing the top of the filter inwards,then pull it forward
out from the unit.
A5.4 Slide the top of the new charcoal filter into the top of the filter cavity.
Charcoal
Filter