![background image](http://html1.mh-extra.com/html/midea/tm05k6bw-p/tm05k6bw-p_instruction-manual_1791428020.webp)
20
3. Place the mounting plate against the wall and insert the toggle wings into the holes in
the wall to mount the plate.
A2. USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET
A3. CHECK BLOWER PLATE
• Place the microwave in its upright position, with the top of the unit facing up.
• Check to see that the blower plate is correctly installed on the unit.
You need to drill holes for the top support screws and a hole large enough for the power
cord to fit through.
• Read the instructions on the TOP CABINET TEMPLATE.
• Tape it underneath the top cabinet.
NOTE: Adjust top template accordingly if the microwave is being spaced out from the wall
due to cabinet depth (including cabinet doors) of more than 13".
• Drill the holes, following the instructions on the TOP CABINET TEMPLATE.
CAUTION: Wear safety goggles when drilling holes in the cabinet bottom.
NOTE: Before tightening toggle bolts and wood screw, make sure the bott m of the
mounting plate touch the bottom of the cabinet when pushed flush against the wall and
that the plate is properly centered under the cabinet.
CAUTION: Be careful to avoid pinching fingers between the back of the mounting plate
and the wall.
4. Tighten all bolts. Pull the plate away from the wall to help tighten the bolts.
Blower Plate