background image

When first using the dehumidifier, operate the unit

continuously 24 hours. Make sure the plastic cover on

the continuous drain hose outlet install stightly 

properly so there are no leaks.

This unit is designed to operate with a working 

environment between 5 C/41 F and 32 C/90 F,

 and between 30%(RH) and 80%(RH).

If the unit has been switched off and needs to be 

switched on again quickly , allow approximately three 

minutes for the correct operation to resume.

Do not connect the dehumidifier to a multiple socket

outlet, which is also being used for other electrical

  applications only. This dehumidifer should not be used

  for commercial or industrial applications.

  Place the dehumidifier on a smooth, level floor strong

  enough to support the unit with a full bucket of water.

  Allow at least 20cm of air space on all sides of the unit

  for good air circulation (at least 40cm of air space on 

  air outlet).

  Place the unit in an area where the temperature will 

  not fall below 5 C(41 F). The coils can become covered 

  with frost at temperatures below 5 C(41 F), which may 

  reduce performance. 

  Place the unit away from the clothes dryer, heater or 

  radiator.

  Use the unit to prevent moisture damage anywhere 

  books or valuables are stored.

  Use the dehumidifier in a basement to help prevent

  moisture damage. 

  The dehumidifier must be operated in an enclosed 

  area to be most effective.

  Close all doors, windows and other outside openings 

  to the room.

A dehumidifier operating in a basement will have little 

or no effect in drying an adjacent enclosed storage 

area, such as a closet, unless there is adequate 

circulation of air in and out of the area.

  Do not use outdoors.

  This dehumidifer is intended for indoor residential 

Casters(At four points on the bottom of unit)

   Casters can  move freely.

   Do not force casters to move over carpet, nor 

   move the unit with water in the bucket.

   (The unit may tip over and spill water.)

 Page 12 

Operating Instructions 

Positioning the unit

When using the unit

• 

• 

Control Panel Features

NOTE: The following control panels 

are for explanation purpose only.  The control panel of the unit you 

purchased may be slightly different according to the models. Your machine may not contain some indicators or 

buttons. The actual shape shall prevail.   

20cm or more

40cm or more

20cm or more

20cm or more

40cm or more

 

 

 
 

 

 

 

 

  
 

 

 

 

appliances.

Select a suitable location, making sure you have easy

access to an electrical outlet. 

Plug the unit into a  electrical socket-outlet with earth

connection.

Make sure the Water bucket is correctly fitted 

otherwise the unit will not operate properly. 

 

 

 

 

NOTE:When the water in the bucket reaches to a certain

level,please be careful to move the machine to avoid it

falling down.  

 Operating

Instructions

Summary of Contents for MDDF-16





















Reviews: