Middleby Marshall X55G Series, Owner'S Operating & Installation Manual

Page: 7 / 46

SECTION 1
DESCRIPTION
7
X70G/X55G Series Oven Component Locations
III. COMPONENT FUNCTION
A. On/Off Switch & Control Panel (User
Interface)
On/Off switch allows the operator to completely power
off the oven. Control panel allows operator to adjust
bake time and temperature as well as entrance side
and exit side air flow. Also provides diagnostic
messages for oven operation.
B. Serial Data Plate
Provides specifications for the oven that affect
installation and operation.
C. Reset Circuit Breakers
Resets the circuit in the event of overload.
D. Conveyor Drive Motor
Moves the conveyor (located inside right rear control
cabinet).
E. Conveyor
Moves the food product through the oven.
F. Crumb Pans
Catches crumbs and other materials that drop through
the conveyor belt(s). One crumb pan is located at each
end of the lower unit’s conveyor belt.
G. High Limit Reset Button
On rear of control box.
H. End Plugs
Allows access to the oven’s interior baking chamber.
I. Air Curtains or Eyebrows
Can be adjusted to various heights to prevent heat
loss into the environment.
J. Window
Allows the user to access food products inside the
baking chamber.
K. Photo Cell or Electronic Eye
Allows the oven to enter and exit Energy Savings
Mode.
L. Main Blowers (not shown)
Project hot air from burner (not shown) to and thru the
air fingers.
M. Air Impingement Fingers (not shown)
Direct air in controlled fashion to the product being
baked through a patterned arrangement of extruded
nozzles (inside cavity above and below conveyor).