SECTION 4
MAINTENANCE
33
9. AS EACH BLANK PLATE OR AIR FINGER IS
REMOVED, WRITE A “LOCATION CODE” ON IT
WITH A MARKER to make sure it can be
reinstalled correctly.
Example of markings:
(Top Row)
T1 T2 T3 T4
(Bottom Row)
B1 B2 B3 B4
10. Remove, empty, and clean the drip pans.
11. Disassemble the air fingers as shown in Figure 29.
AS EACH FINGER IS DISASSEMBLED, WRITE
THE “LOCATION CODE” FOR THE FINGER ON
ALL THREE OF ITS PIECES. This will help you in
correctly reassembling the air fingers.
Disassembling the Air Fingers
CAUTION
Incorrect reassembly of the air fingers will change the
baking properties of the oven.
12. Clean the air finger components and the interior of
the baking chamber using a vacuum cleaner and
a damp cloth. Refer to the warnings at the
beginning of this Section for cleaning precautions.
Summary of Contents for X55G Series
