background image

 

 

NOTICE: 

This Owner’s Operating and Installation Manual should be 

given to the user. The operator of the oven should be 

familiar with the function and operation of the oven. 
This manual must be kept in a prominent, easily reachable 

location near the oven. 
Ovens are shipped from the factory configured for use with 

Natural gas. If permitted by local, national,  and 

international codes, at the time of installation the oven may 

be converted to Propane gas operation. This conversion 

requires the use of a Gas Conversion Kit that is supplied 

with the oven. 
For CE-approved ovens, the conversion is described in the 

Installation section of this manual. 
For domestic and standard export ovens, instructions are 

included in the Gas Conversion Kit. 
Middleby Marshall suggests a service contract with a 

Middleby Authorized Service Agent (ASA). 

DEFINITIONS  

DANGER 

INDICATES A HAZARDOUS SITUATION THAT, IF NOT 

AVOIDED, WILL RESULT IN DEATH OR SERIOUS 

INJURY.

 

 

WARNING 

Indicates a hazardous situation that, if not avoided, 

could result in death or serious injury.

 

 

CAUTION 

Indicates a hazardous situation that, if not avoided, 

could result in minor or moderate injury.

 

 

NOTICE 

Indicates situations not related to physical injury that, if not 

avoided, could cause damage to the machine or 

surrounding property and could affect warranty coverage. 

IMPORTANT 

Includes other information required by the operator or 

installer. 

WARNING 

This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision 

or instruction concerning use of the appliance by a 

person responsible for their safety. 

 

Children should be supervised to ensure that they 

do not play with the appliance. 

 

Cleaning and user maintenance shall not be made 

by children without supervision. 

 

 

RETAIN THIS MANUAL FOR FUTURE REFERENCE 

WARNING 

In a prominent location, post the emergency 

telephone number of your local gas supplier and 

instructions to be followed in the event you smell gas. 

Instructions to be followed in the event the user 

smells gas shall be obtained by consulting the local 

gas supplier. If the smell of gas is detected, 

immediately call the emergency phone number of 

your local gas company. They will have personnel 

and provisions available to correct the problem. 

 

WARNING 

Do not spray aerosols in the vicinity of this appliance 

while it is in operation.

 

 

WARNING 

For your safety, do not store or use gasoline or other 

flammable vapors and liquids in the vicinity of this or 

any other appliance.

 

 

WARNING 

Improper installation, adjustment, alteration, service, 

or maintenance can cause property damage, injury, 

or death. Read the installation, operation, and 

maintenance instructions thoroughly before 

installing or servicing the equipment.

 

 

IMPORTANT 

An electrical wiring diagram for the oven is located inside 

the machinery compartment. 

IMPORTANT 

It is the customer’s responsibility to report any concealed 

or non-concealed damage to the freight company. Retain 

all shipping materials until it is certain that the equipment 

has not suffered concealed shipping damage. 

NOTICE 

Contact your Middleby Authorized Service Agent to install 

and perform maintenance and repairs and if necessary to 

convert equipment for use with other gases. An authorized 

service agency directory is supplied with your oven and 

available here: https://middlebymarshall.com 

NOTICE 

Using parts other than genuine Middleby Marshall Factory 

manufactured parts relieves the manufacturer of all 

warranty and liability. 

NOTICE 

Middleby Marshall (Manufacturer) reserves the right to 

change specifications at any time. 

NOTICE 

The equipment warranty is not valid unless the oven is 

installed, started, and demonstrated under the supervision 

of a factory certified installer. 

NOTICE 

The equipment is only for professional use and shall be 

used by qualified personnel. 

 

Summary of Contents for X55G Series















































Reviews: