Routine Operation
3-48
DVC4000
Operator’s Guide/Tech Ref Manual
9.
Press the
SEL
key or Right arrow key and observe the
Recall Preset
option changes to
#X:Preset #X
, as
shown in
Figure 3-125
, and the
>
cursor changes to a
!
cursor.
Figure 3-125: Recall Preset Option
10.
Press the Up, Down, Left, or Right arrow keys to select
Preset
1
thru
9
, as required, and press the
SEL
key.
11.
Press the
ESC
key repeatedly until the Main Screen is
displayed.
12.
Press the Up arrow key to move the
>>
cursor to the
MPEG Decoder
option.
13.
Press the
SEL
key or Right arrow key and observe the
MPEG Decoder
menu is displayed.
14.
Press the Up or Down arrow keys, as required, to
select the
Video Format:
option and observe the
cursor changes to a
*
cursor.
See Figure 3-126
.
Figure 3-126: MPEG Decoder Menu - Typical
15.
Observe the Preset video format
is displayed.
16.
Press the
ESC
key and observe the Main Screen
menu is displayed.
Preset Menu
Save Settings
! #X:Preset #X
MPEG Decoder
Chroma: 4:2:0
* Video Format:
1920x1080i25
3.6.8
Monitor Chroma Setting
The procedure required to monitor the chroma setting for
individual Presets is contained in the following steps.
Note
In order to monitor chroma settings when
performing the following steps, the DVC4000-D
must be powered up and must have video stream
inputs into the rear panel
ASI IN
connector.
1.
Verify the DVC4000-D is powered up.
2.
Verify the Main Screen menu is displayed.
See
Figure 3-127
. If the Main Screen is not displayed,
press the
ESC
key repeatedly until the Main Screen is
displayed.
Figure 3-127: Main Screen Menu
3.
Press the Down arrow key, as required, to move the
>>
cursor to the
System Menu
option.
4.
Press the
SEL
key or Right arrow key and observe the
System
Menu
is displayed.
See Figure 3-128
.
Figure 3-128: System Menu - Typical
DVC4000D
>> MPEG Decoder
System Menu
System Menu
>> Preset Menu
Active Errors
Error Log
