Routine Operation
3-18
DVC4000
Operator’s Guide/Tech Ref Manual
Figure 3-32: Preset Menu
8.
Press the Up or Down arrow keys, as required, to
move the cursor to the
Recall Preset
option. Observe
the cursor changes to a
>
cursor.
9.
Press the
SEL
key or Right arrow key and observe the
Recall Preset
option changes to
#X:Preset #X
, as
shown in
Figure 3-33
, and the
>
cursor changes to a
!
cursor.
Figure 3-33: Recall Preset Option
10.
Press the Up, Down, Left, or Right arrow keys to select
Preset
1
thru
9
, as required, and press the
SEL
key.
11.
Press the
ESC
key, as required, until the Main Screen
is displayed.
12.
Press the Up arrow key to move the
>>
cursor to the
MPEG Encoder
option.
13.
Press the
SEL
key or Right arrow key and observe the
MPEG Encoder
menu (
Figure 3-34
) is displayed.
Preset Menu
* #X:Preset #X
Save Settings
Recall Preset
Preset Menu
Save Settings
! #X:Preset #X
Figure 3-34: MPEG Encoder Menu
14.
Press the Up or Down arrow key, as required, to select
the
Delay:
option.
15.
Press the
SEL
key or Right arrow key and observe the
>
cursor changes to a
!
cursor.
16.
Press the Up, Down, Left, or Right arrow keys, as
required, to change the
Delay:
setting to
Low
or
Standard
.
17.
Press the
SEL
key and observe the
!
cursor changes
to a
>
cursor.
18.
Press the
ESC
key repeatedly until the Main Screen is
displayed.
3.5.6
Monitor/Change Bit Rate Settings
To monitor or change Bit Rate settings, perform the following
steps for each Preset, as required.
1.
Verify the DVC4000-E is powered up.
2.
Verify the Main Screen (
Figure 3-35 on page 3-19
) is
displayed. If the Main Screen is not displayed, press
the
ESC
key repeatedly until the Main Screen is
displayed.
MPEG Encoder
> Delay: Standard
Chroma: 4:2:0
BISS: Off
