Routine Operation
3-41
DVC4000
Operator’s Guide/Tech Ref Manual
7.
Observe the
Preset Menu
is displayed.
See Figure 3-
101
.
Figure 3-101: Preset Menu
8.
Press the Up or Down arrow keys, as required, to
move the cursor to the
Recall Preset
option. Observe
the cursor changes to a
>
cursor.
9.
Press the
SEL
key or Right arrow key and observe the
Recall Preset
option changes to
#X:Preset #X
, as
shown in
Figure 3-102
, and the
>
cursor changes to a
!
cursor.
Figure 3-102: Recall Preset Option
10.
Press the Up, Down, Left, or Right arrow keys to select
Preset
1
thru
9
, as required, and press the
SEL
key.
11.
Press the
ESC
key repeatedly until the Main Screen
menu is displayed.
12.
Press the Up arrow key to move the
>>
cursor to the
MPEG Decoder
option.
13.
Press the
SEL
key or Right arrow key and observe the
MPEG Decoder
menu is displayed.
See Figure 3-
103
.
Preset Menu
* #X:Preset #X
Save Settings
Recall Preset
Preset Menu
Save Settings
! #X:Preset #X
Figure 3-103: MPEG Decoder Menu - Typical
14.
Press the Up or Down arrow keys, as required, to
select the
Svc#:
option and observe the cursor
changes to a
>
cursor.
15.
Select the
SEL
key or Right arrow key and observe
the
>
cursor changes to a
!
cursor.
16.
Select the Up, Down, Left, or Right arrow keys to
select the Preset service number required.
17.
Press the
SEL
key and observe the
!
cursor changes
to a
>
cursor.
18.
Press the
ESC
key and observe the Main Screen
menu is displayed.
3.6.4
Select Service Number 0 PIDs
The steps required to select Preset custom service number PIDs
are contained in the following steps. Note that PIDs can only be
changed for service number 0. PIDs for all other service
numbers are fixed and cannot be changed.
1.
Verify the DVC4000-D is powered up.
2.
Verify the Main Screen menu is displayed.
See
Figure 3-104 on page 3-42
. If the Main Screen is not
displayed, press the
ESC
key repeatedly until the Main
Screen is displayed.
MPEG Decoder
* Svc: Service 2
Video: Good
Svc#: 1 of 3
