Routine Operation
3-21
DVC4000
Operator’s Guide/Tech Ref Manual
Figure 3-42: Preset Menu
8.
Press the Up or Down arrow keys, as required, to
move the cursor to the
Recall Preset
option. Observe
the cursor changes to a
>
cursor.
9.
Press the
SEL
key or Right arrow key and observe the
Recall Preset
option changes to
#X:Preset #X
, as
shown in
Figure 3-43
, and the
>
cursor changes to a
!
cursor.
Figure 3-43: Recall Preset Option
10.
Press the Up, Down, Left, or Right arrow keys to select
Preset
1
thru
9
, as required, and press the
SEL
key.
11.
Press the
ESC
key, as required, until the Main Screen
is displayed.
12.
Press the Up arrow key to move the
>>
cursor to the
MPEG Encoder
option.
13.
Press the
SEL
key or Right arrow key and observe the
MPEG Encoder
menu (
Figure 3-44
) is displayed.
Preset Menu
* #X:Preset #X
Save Settings
Recall Preset
Preset Menu
Save Settings
! #X:Preset #X
Figure 3-44: MPEG Encoder Menu
14.
Press the Up or Down arrow key, as required, to select
the
Video:
option.
15.
Press the
SEL
key or Right arrow key and observe the
>
cursor changes to a
!
cursor.
Note
In the following step,
Video:
options for NTSC
operation are
SDI 525
,
NTSC
, or
NTSC Ped
. For
PAL operation, options are
SDI 625
,
PAL, PAL-M
,
or
PAL-N
.
16.
Press the Up, Down, Left, or Right arrow keys, as
required, to change the
Video:
setting, as required.
17.
Press the
SEL
key and observe the
!
cursor changes
to a
>
cursor.
18.
Press the
ESC
key repeatedly until the Main Screen is
displayed.
3.5.8
Monitor/Change Audio A Settings
To monitor or change
Audio A
option settings, perform the
following steps for each Preset, as required:
1.
Verify the DVC4000-E is powered up.
2.
Verify the Main Screen (
Figure 3-45 on page 3-22
) is
displayed. If the Main Screen is not displayed, press
the
ESC
key repeatedly until the Main Screen is
displayed.
MPEG Encoder
Delay: Standard
> Video: SDI 525
Rate: 10.0Mb/s
