Routine Operation
3-36
DVC4000
Operator’s Guide/Tech Ref Manual
Figure 3-90: System Info Menu - Typical
7.
Press the Up or Down arrow keys to review the
System
Info
list of firmware versions contained in
your DVC4000-E.
8.
When system information has been reviewed, press
the
ESC
key repeatedly until the Main Screen is
displayed.
3.5.19
Perform System Reset
The procedure required to perform a DVC4000-E system reset,
in the event of a suspected system crash or lock-up, is contained
in the following steps.
1.
Verify the DVC4000-E is powered up.
2.
Verify the Main Screen (
Figure 3-91
) is displayed. If
the Main Screen is not displayed, press the
ESC
key
repeatedly until the Main Screen is displayed.
System Info
* DCC
* 0.0.0.8
* Front Panel
* 0.0.6.5
* MPEG Encoder
* 0.1.2.1
Figure 3-91: Main Screen Menu
3.
Press the Down arrow key, as required, to move the
>>
cursor to the
System Menu
option.
4.
Press the
SEL
key or Right arrow key and observe the
System
Menu
is displayed.
See Figure 3-92
.
Figure 3-92: System Menu - Typical
5.
Press the Up or Down arrow keys, as required, to
move the cursor to the
>
System Reset
option.
6.
Press the
SEL
key or Right arrow key to select the
System Reset
option and observe the DVC4000-E
powers down momentarily, and then re-boots.
7.
After a short delay, observe the Main Screen is
displayed.
DVC4000E
>> MPEG Encoder
System Menu
System Menu
>> Preset Menu
Active Errors
Error Log
