Routine Operation
3-47
MRX4000 PLUS
Operator’s Guide/
Technical Reference Manual
Note
If the cursor adjacent to the
FMR Settings
option
is an asterisk (
*
), go to
step 4
; if the cursor
adjacent to the
FMR Settings
option is a
>>
, go to
step 13
.
4.
Press the Down arrow key to move the cursor to the
Main screen
System Menus
option and press the
SEL
key.
5.
Observe the
System Menu
(
Figure 3-95
) is displayed.
Figure 3-95: System Menu
6.
Press the Up or Down arrow keys, as required, to
select the
>> Preset Menu
option.
7.
Observe the
Preset Menu
(
Figure 3-96
) is displayed.
Figure 3-96: Preset Menu - Typical
8.
Press the Up or Down arrow keys, as required, to
select the
> Recall Preset
option.
9.
Press the
SEL
key or Right arrow key and observe the
>
cursor changes to a
!
cursor.
10.
Press the Up, Down, Right, or Left arrow keys, as
required, to select the Preset programmed for the IF
System Menu
>> Preset Menu
Active Errors
Error Log
Preset Menu
* #1:Preset 1
Save Settings
Recall Preset
IN Analog or RF IN Analog operation mode and press
the
SEL
key.
11.
Press the
ESC
key until the Main screen is displayed.
12.
Press the Up arrow key, as required, to select the
FMR
Settings
option.
Notes
In the following step, if the cursor adjacent to the
FMR Settings
option is not a
>>
cursor, the wrong
Preset has been selected for the IF IN Analog or
RF IN Analog operation mode.
Repeat from
step 4
to select the correct Preset.
13.
Verify the cursor adjacent to the
FMR Settings
option
is a
>>
cursor.
14.
Press the
SEL
key or the Right arrow key and observe
the
FMR
menu (
Figure 3-97
) is displayed.
Figure 3-97: FMR Menu - Typical
Notes
The steps required to change sub-carrier
frequencies for Channels 1 thru 4 are identical.
In the following steps, “
X
” represents channel
1
,
2
,
3
, or
4
. Select the Channel option contained in the
FMR
menu, as required, to monitor, enable, or
disable De-Emphasis for that Channel.
FMR
> VidFil: ON
VidDev: 4 MHz
1 SubFreq: 4830
Summary of Contents for MRX4000 PLUS
Page 2: ......