![background image](http://html.mh-extra.com/html/microwave-radio-communications/mrx4000-plus/mrx4000-plus_operators-manual_1789799072.webp)
Routine Operation
3-50
MRX4000 PLUS
Operator’s Guide/
Technical Reference Manual
3.9.1
Monitor Channel Frequency
The procedure required to monitor the current Preset RF/IF
channel frequency is contained in the following steps.
1.
Verify the MRX4000 PLUS is powered up.
2.
Verify the Main screen (
Figure 3-99
) is displayed. If
the Main screen is not displayed, press the
ESC
key
until the Main screen is displayed.
Figure 3-99: Main Screen Menu
3.
Press the Up or Down arrow keys, as required, to
move the cursor to the
RF/IF Settings
option.
See
Figure 3-100
.
Figure 3-100: Main Menu - RF/IF Settings Option
4.
Press the Down arrow key to move the cursor to the
Main screen
System Menus
option and press the
SEL
key.
5.
Observe the
System Menu
(
Figure 3-101
) is
displayed.
>> MPEG Settings
FMR Settings
COFDM Settings
>> RF/IF Settings
System Menus
FMR Settings
Figure 3-101: System Menu
6.
Press the Up or Down arrow keys, as required, to
select the
>> Preset Menu
option.
7.
Observe the
Preset Menu
(
Figure 3-102
) is displayed.
Figure 3-102: Preset Menu - Typical
8.
Press the Up or Down arrow keys, as required, to
select the
> Recall Preset
option.
9.
Press the
SEL
key or Right arrow key and observe the
>
cursor changes to a
!
cursor.
10.
Press the Up, Down, Right, or Left arrow keys, as
required, to select the Preset required and press the
SEL
key.
11.
Press the
ESC
key until the Main screen is displayed.
12.
Press the Up arrow key, as required, to select the
RF/IF Settings
option.
See Figure 3-103
.
Figure 3-103: Main Screen Menu - RF/IF Option
System Menu
>> Preset Menu
Active Errors
Error Log
Preset Menu
* #1:Preset 1
Save Settings
Recall Preset
>> RF/IF Settings
System Menus
FMR Settings
Summary of Contents for MRX4000 PLUS
Page 2: ......