Routine Operation
3-70
MRX4000 PLUS
Operator’s Guide/
Technical Reference Manual
Notes
In the following step, all options for the MRX4000
PLUS will be displayed with their version numbers
in the
System Info
menu.
If your MRX4000 PLUS does not contain a specific
option, the firmware version will indicate
Not
Detected
.
The MRX4000 PLUS menu displays a maximum of
three lines of data. For simplicity,
Figure 3-172
is
shown with all available menu options.
6.
Press the
SEL
key or Right arrow key and observe the
System Info
menu (
Figure 3-172
) is displayed.
7.
Press the Up and Down arrow keys, as required, to
review the
System Info
list of firmware versions and
the configuration options contained in your MRX4000
PLUS.
Figure 3-172: System Info Menu - Typical
8.
Press the
ESC
key until the Main screen is displayed.
System Menu
* MRX DCC V:
* 0.1.0.1
* Front Panel V:
* 0.1.2.0
* MPEG V:
* 0.1.3.0
* MPEG FPGA V:
* 0.1.3.0
* COFDM V:
* 0.3.0.0
* FMR V:
* 0.1.0.2
3.10.5
Perform System Reset
The procedure required to perform a MRX4000 PLUS system
reset, in the event of a suspected system crash, is contained in
the following steps.
1.
Verify the MRX4000 PLUS is powered up.
2.
Verify the Main screen (
Figure 3-173
) is displayed. If
the Main screen is not displayed, press the
ESC
key
until the Main screen is displayed.
Figure 3-173: Main Screen Menu
3.
Press the Down arrow key to move the cursor to the
Main screen
System Menus
option and press the
SEL
key.
4.
Observe the
System Menu
(
Figure 3-174
) is
displayed.
Figure 3-174: System Menu
5.
Press the Up or Down arrow keys, as required, to
select the
> System Reset
option, press the Right
arrow key, and observe the confirmation screen is
displayed.
See Figure 3-175 on page 3-71
.
>> MPEG Settings
FMR Settings
COFDM Settings
System Menu
>> Preset Menu
Active Errors
Error Log
Summary of Contents for MRX4000 PLUS
Page 2: ......