Routine Operation
3-64
MRX4000 PLUS
Operator’s Guide/
Technical Reference Manual
Figure 3-154: Main Menu - RF/IF Settings Option
4.
Verify the cursor adjacent to the
RF/IF Settings
option
is a
>>
cursor.
5.
Press the
SEL
key or the Right arrow key and observe
the
RF/IF
menu (
Figure 3-155
) is displayed.
Figure 3-155: RF/IF Menu - Typical
6.
Press the Up or Down arrow keys, as required, to
select the
> Source:
option.
7.
Press the
SEL
key and observe the
>
cursor changes
to a
!
cursor.
8.
Press the Up, Down, Left, or Right arrow keys to select
IF
or
RF
, as required, and press the
SEL
key.
9.
Press the
ESC
key until the Main screen is displayed.
10.
Perform
“Change Filter Setting” on page 3-58
, as
required, to select the filter setting required.
>> RF/IF Settings
System Menus
FMR Settings
Squelch: Off
RF/IF
Ch: 1
> Filt: 15MHz LC
Notes
If the new settings are to be saved as a Preset, go
to
step 11
.
If the settings are not to be saved as a Preset, this
procedure is complete.
11.
Verify the Main screen (
Figure 3-156
) is displayed. If
the Main screen is not displayed, press the
ESC
key
until the Main screen is displayed.
Figure 3-156: Main Screen Menu
12.
Press the Down arrow key to move the cursor to the
Main screen
System Menus
option and press the
SEL
key.
13.
Observe the
System Menu
(
Figure 3-157
) is
displayed.
Figure 3-157: System Menu
14.
Press the Up or Down arrow keys, as required, to
select the
>> Preset Menu
option.
15.
Press the
SEL
key and observe the
Preset Menu
(
Figure 3-158 on page 3-65
) is displayed.
>> MPEG Settings
FMR Settings
COFDM Settings
System Menu
>> Preset Menu
Active Errors
Error Log
Summary of Contents for MRX4000 PLUS
Page 2: ......