Routine Operation
3-18
MRX4000 PLUS
Operator’s Guide/
Technical Reference Manual
Figure 3-19: System Menu
6.
Press the Up or Down arrow keys, as required, to
select the
>> Preset Menu
option.
7.
Observe the
Preset Menu
(
Figure 3-20
) is displayed.
Figure 3-20: Preset Menu - Typical
8.
Press the Up or Down arrow keys, as required, to
select the
> Recall Preset
option.
9.
Press the
SEL
key or Right arrow key and observe the
>
cursor changes to a
!
cursor.
10.
Press the Up, Down, Right, or Left arrow keys, as
required, to select the Preset programmed for the IF
IN MPEG or RF IN MPEG operation mode and press
the
SEL
key.
11.
Press the
ESC
key until the Main screen is displayed.
12.
Press the Up arrow key, as required, to select the
MPEG Settings
option.
System Menu
>> Preset Menu
Active Errors
Error Log
Preset Menu
* #1:Preset 1
Save Settings
Recall Preset
Notes
In the following step, if the cursor adjacent to the
MPEG Settings
option is not a
>>
cursor, the
wrong Preset has been selected for the IF IN
MPEG or RF IN MPEG operation mode.
Repeat from
step 4
to select the correct Preset.
13.
Verify the cursor adjacent to the
MPEG Settings
option is a
>>
cursor.
14.
Press the
SEL
key or the Right arrow key and observe
the
MPEG Decoder
menu (
Figure 3-21
) is displayed.
Figure 3-21: MPEG Decoder Menu - Typical
15.
Press the Up or Down arrow keys, as required, to
select the
> Audio Out:
option.
16.
Press the Right arrow or
SEL
key and observe the
>
cursor adjacent to the
Audio Out:
option
changes to a
!
cursor.
17.
Press the Right, Left, Up, or Down arrow keys, as
required, to select
Ana
or
Dig
.
18.
Press the
SEL
key and observe the
!
cursor changes
to a
>
cursor.
19.
Press the
ESC
key until the Main screen is displayed.
3.6.3
Monitor/Change NTSC Pedestal
To monitor/change NTSC Pedestal option settings on an NTSC
configuration MRX4000 PLUS only, perform the following steps:
> Color Bars: ON
NTSC Ped: OFF
MPEG Decoder
Audio Out: Ana
Summary of Contents for MRX4000 PLUS
Page 2: ......