Routine Operation
3-13
MRX4000 PLUS
Operator’s Guide/
Technical Reference Manual
3.4.5
Accessing Menus
The option menus are accessed using the front panel
SEL
key
and/or the Left, Right, Up, and Down arrow keys.
To select the option required, press the Up or Down arrow keys
to move the cursor (
>>
) to the option required and press either
the
SEL
key or the Right arrow key. A typical Main screen menu
showing selection of the
>> MPEG
Settings
option is shown in
Figure 3-10
and a typical
MPEG Decoder
menu is shown in
Figure 3-11
.
Figure 3-10: Menu Options
Figure 3-11: MPEG Decoder Menu Options
Menus will display a maximum of three options. If the menus are
not as shown in
Figure 3-10
or
Figure 3-11
, press the Up arrow
key until the option required is displayed.
For example, the Main screen menu also contains a
System
Menus
option that will be displayed by moving the cursor (
>>
)
down using the Down arrow key.
See Figure 3-12
.
>> MPEG Settings
FMR Settings
COFDM Settings
> Color Bars: ON
NTSC Ped: OFF
MPEG Decoder
Audio Out: Ana
Figure 3-12: Modulator Menu Additional Option
See
“Monitoring Operations”
to access individual Main screen
menu options .
3.5
Monitoring Operations
Once the MRX4000 PLUS is set up using the Configurator
software and is powered up, you will be able to check its
configuration and monitor its operation.
The following sections describe how to use the menus and how
to monitor the quality of the microwave link.
Here are the tasks described:
3.6
Monitor/Change MPEG Settings
If your MRX4000 PLUS configuration contains an MPEG
Decoder, the procedures listed in
Table 3-3 on page 3-14
are
used to monitor or change internal MPEG Decoder parameters
or settings.
Topic
Page
Monitor/Change MPEG Settings
3-13
Monitor/Change COFDM Settings
3-28
Monitor/Change FMR Settings
3-37
Monitor/Change MRX4000 PLUS RF/IF Section
Settings
3-48
Monitor/Change System Menu Options
3-65
FMR Settings
>> System Menus
Summary of Contents for MRX4000 PLUS
Page 2: ......