7 – Manufacturing Test
IGLOO2 FPGA Evaluation Kit User Guide
57
Figure 37.
Register Configuration Tab
Test Procedure for LPDDR
In LPDDR test, you can test the board in multiple locations.
1. Enter
No. Of Locations
those are to be accessed on LPDDR memory.
Note:
By default number of locations is shown 5000. It can be modified.
2. Click
DDR TEST
to run the LPDDR write or read test. While the test is in progress, the DDR TEST
PROGRESS shows the progress of the test in percentage.
Figure 38
shows the test status as Pass
once the test is completed successfully.
Figure 38.
LPDDR Test
Note:
If the LPDDR test fails, the number of locations are displayed where the test is failed.