Microscan Visionscape HE1600T Page 2 Getting Started Download | Manualshive

Page: 2 / 79

background image

Copyright and Disclaimer

Copyright ©2009 by Microscan Systems, Inc.
1201 S.W. 7th Street, Renton, WA, U.S.A. 98057
(425) 226-5700 FAX: (425) 226-8682

All rights reserved. The information contained herein is proprietary and is provided solely for the purpose of allowing
customers to operate and/or service Microscan manufactured equipment and is not to be released, reproduced, or used
for any other purpose without written permission of Microscan.

Throughout this manual, trademarked names might be used. Rather than place a trademark (™) symbol at every
occurrence of a trademarked name, we state herein that we are using the names only in an editorial fashion, and to the
benefit of the trademark owner, with no intention of infringement.

Disclaimer

The information and specifications described in this manual are subject to change without notice.

Latest Manual Version

For the latest version of this manual, see the Download Center on our web site at: www.microscan.com.

Technical Support

For technical support, email: [email protected].

Microscan Systems, Inc

.

1201 S.W. 7th Street
Renton, WA 98057
U.S.A.
Tel: 425 226 5700
Fax: 425 226 8250
[email protected]

Microscan Europe

Tel: 31 172 423360
Fax: 31 172 423366

Microscan Asia Pacific

R.O. Tel: 65 6846 1214
Fax: 65 6846 4641

Microscan Limited Warranty Statement and Exclusions

What Is Covered?

Microscan Systems Inc. warrants to the original purchaser that products manufactured by it will be free from defects in
material and workmanship under normal use and service for a period of one year from the date of shipment. This
warranty is specifically limited to, at Microscan’s sole option, repair or replacement with a functionally equivalent unit
and return without charge for service or return freight.

What Is Excluded?

This limited warranty specifically excludes the following: (1) Any products or parts that have been subject to misuse,
neglect, accident, unauthorized repair, improper installation, or abnormal conditions or operations; (2) Any products or
parts that have been transferred by the original purchaser; (3) Customer mis-adjustment of settings contrary to the
procedure described in the Microscan Systems Inc. owners manual; (4) Upgrading software versions at customer request
unless required to meet specifications in effect at the time of purchase; (5) Units returned and found to have no failure
will be excluded; (6) Claims for damage in transit are to be directed to the freight carrier upon receipt. Any use of the
product is at purchaser’s own risk. This limited warranty is the only warranty provided by Microscan Systems Inc.
regarding the product. Except for the limited warranty above, the product is provided “as is.” To the maximum extent

«
1
2
3
4
...
»

Summary of Contents for Visionscape HE1600T
















































































Reviews:

No comments

Related manuals for Visionscape HE1600T

540EZ - Speedlite - Hot-shoe clip-on Flash

Brand: Canon Pages: 4

Brand: JAI Pages: 38

Brand: Velleman Pages: 19

Brand: Hama Pages: 32

Brand: Sungale Pages: 30

C730IP 10.028.16

Brand: Smartwares Pages: 29

Brand: AdView Pages: 3

Brand: BolyGuard Pages: 18

Brand: Sunrex Pages: 5

Brand: FastVision Pages: 52

Brand: Easypix Pages: 16

Brand: IDS Pages: 22

SP85mm F/1.8 Di VC USD

Brand: Tamron Pages: 4

Lumix DMC-LX100EBS

Brand: Panasonic Pages: 332

Lumix DMC-FX500P

Brand: Panasonic Pages: 54

Lumix DMC-FX100P

Brand: Panasonic Pages: 53

iPalm PV-DC3010

Brand: Panasonic Pages: 64

Lumix DMCLX100S

Brand: Panasonic Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands