Install Scanner
MS-610 Scanner User’s Manual
1-13
1–Set
up and
Inst.
9
Install Scanner
The MS-610 scanner can be mounted directly to a mounting surface of your
choice, or indirectly, via a mounting plate.
To permanently mount the scanner:
1. Position the scanner in a dry place, devoid of sunlight, bright lights, or
laser light from other sources.
b. Before mounting, ensure sufficient clearance at the rear of the scanner
to allow for the 15-pin connector and cable.
c.
If not using the mounting plate
, use the measurements provided in
figure 1-9 to locate centers of mounting holes and drill four 5/32 inch (4
mm) holes, or
If using the mounting plate
(see appendix D), use the four
perimeter holes to mount the plate and mount scanner directly to
the four inner holes on the plate.
d. Secure scanner with four 6-32 screws.
Caution:
Do not allow
the mounting screws
to penetrate into the
scanner case more
than 0.175 in. (4.4
mm) or damage to the
scanner may result.
Caution:
To prevent
twisting or distortion of
the scanner housing,
ensure that the mount-
ing surface or bracket
is flat.
Figure 1-9 Bottom Mounting Holes (not full size)
.425 "
(10.8 mm )
1.40" (35.56 m m)
2.25" (57.15 m m)
6-32 threa ds
(4 places)
1.50 "
(38.10 mm )
2.29 "
(74.17 mm )
1.0 "
(25.4 mm )
Front
