vi
MS-610 Scanner User’s Manual
About This Manual
This manual provides complete information on setting up and installing the
MS-610 (visible) and the MS-615 (infrared) scanner. Unless otherwise
noted, references to the MS-610 apply also to the MS-615.
Chapter 1 provides overall step-by-step instructions for setting up and
installing the MS-610 scanner with specific “go to” references to other chap-
ters and appendices.
Chapter 2 provides instructions for configuring the MS-610 scanner by
menu.
Chapter 3 provides instructions for configuring the MS-610 scanner by
serial command.
Chapter 4 describes serial operational commands that can be used by the host.
For specifications, see appendix A. The appendices also include reference
tables, as well as other useful information relating to bar coding and the
MS-610 scanner.
Keystroke Entries
Keystrokes to be entered from your terminal are highlighted in bold, as in
<D>
, including a < left angle bracket symbol (unless redefined by Command
Start Character command) and followed by a > right angle bracket symbol.
Approvals
This equipment is approved for use by the following organizations:
• CDRH (Center for Devices & Radiological Health)
• UL (Underwriters Laboratories, Inc.)
• CSA (Canadian Standards Association)
• CISPR (International Special Committee on Radio Interference)
• CE (European Community)
• T
üV
(Technischer
ü
berwachungs-Verein) (MS-610 only)
• FCC (Federal Communication Commission)
• This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet Appareil numerique de la classe A respecte toutes les exigences du
Reglement sur le material broilleur du Canada.
For connection to a Listed direct plug-in power unit marked Class 2 and
rated at 5 VDC @ 400 mA and ±12 VDC @ 80 mA.
