Chapter
MS-610 Scanner User’s Manual
4-1
4–Oper
a
ti
ons.
Operational
Commands
Chapter Contents
Summary of Operational Commands .......................................... 4-2
Program Management Commands .............................................. 4-3
Device Control Commands .......................................................... 4-3
Code Type Commands ................................................................ 4-4
Counter Commands ..................................................................... 4-4
Test Commands .......................................................................... 4-5
Status Commands ....................................................................... 4-5
Master Label Commands ............................................................. 4-5
This chapter describes all of the serial operational commands and their func-
tions. See “Summary of Operational Commands,” on page 4-2 for quick refer-
ence.
On-line serial operational commands are sent from the host to the scanner to
carry out routine operations “on the fly” as distinguished from serial configura-
tion commands that are generally used in initial setup.
Operational commands are preceded by a < left angle bracket symbol and fol-
lowed by a > right angle bracket symbol.
1
1. Command start character by default is a left angle bracket, <. It may be redefined by menu or
serial command. However, the end character, a right angle bracket, >, cannot be changed.
4
