Microplex SOLID F166 HD, Operator'S Manual

Page: 88 / 92

SOLID F166 HD User Manual
5-10
Code Descriptions Check Point Countermeasure
53
Stacker communication
fail
The stacker interface cable
connector is not properly plugged
into the printer connector.
Properly plug the stacker
interface cable connector into
the printer connector.
The stacker interface cable
connector is plugged into the
printer connector properly.
Call service engineer.
54
Stacker entry fail
The first page of paper does not
enter into the gap between
front/rear swing paper guide
plates.
Have the first page of paper
enter into the gap between
front/rear swing paper guide
plates.
The first page of paper does enter
into the swing plate unit.
Call service engineer.
Paper is stacked at front paper
guide unit and the roller unit does
not rotate.
Call service engineer.
55
Stacker folding fail
Paper is not folded properly. Manually fold the improperly
folded paper in proper
manner.
Paper is properly folded. Call service engineer.
The stacker table not descend
when pressing the table down
button.
Call service engineer.
The stacker table does descend
when pressing the table down
button.
Call service engineer.
56
Stacker full
The stacker table is in the lowest
position.
Lift up the stacker table by
hand.
The stacker table is not in the
lowest position.
Call service engineer.
57
Stacker table not ready
The stacker table is in the highest
position.
Call service engineer.
The stacker table is not in the
highest position
Lift up the stacker table to the
highest position by hand.
If the stacker table cannot be
lift up to the highest position,
call service engineer.