Microplex SOLID F166 HD, Operator'S Manual

Page: 6 / 92

SOLID F166 HD User Manual
v
Safety Information
Thanks for using MICROPLEX product. MICROPLEX Printware Corp.. is an ISO
9001 certified manufacturer. It’s our responsibility to inform users about the
following safety information:
Safety Instructions
1. Installation: After moving the printer, examine the power cord and confirm
good connection of each connector before turn on the printer. Make sure
the four level feet of the printer kept at the same level. To prevent from
causing damage to the printer, do not incline or shake the printer.
☆
Do not put the printer near direct sunlight.
☆
Do not place the printer near heating source.
☆
Do not put the printer near air conditioner, fan or any heating air exit.
☆
Do not place the printer near dusty location and vibration.
☆
Do not put the printer near combustibles.
☆
Do not place the printer on any unstable surface.
☆
Do not plug in too many power cords or multiple outlet.
☆
Avoid drastic temperature change to maintain print quality.
☆
Do not place the printer in an environment of temperature or humidity
extremes. Environment required for normal printer performance:
※
Temperature: 15
°
C to 30
°
C
※
Humidity: 30% ~ 80% RH
☆
Install the printer in a well air-conditioning room.
☆
Periodic examination of the followings:
※
Does the plug abnormally overheat?
※
Does the AC power cable break?
※
Is there a bad connection of the plug and outlet?
【
Note
】
A proper environment assists better print quality and printer
performance as well as extension of printer life.
2. Operation: This printer is a high-tech product. Please comply with the
manual to handle parts, consumables, and engine. Please employ correct
ways and steps to operate the printer carefully. Do not open the front door
while the printer is printing.