26
Service Manual
www.microphase.eu
Dc
4.3 Brush motor in armature feedback
The following diagram shows an tipical application utilizing a Dc One with Brush motor. The
speed loop velocity is by internal armature feedback.
In the armature voltage PWM converter is used as the internal feedback of speed, when the motor
has not an encoder.
This function is enabled through the following settings on the solder point, and the insertion of RA
and RCA resistance on the adjstustement zone.
Note:
- Don't use terminal 15.
- For terminal input 14 (+Limit switch) and terminal input 16 (-Limit switch) see page 34.
D
C
O
N
E
X
L
CNC
