14
Service Manual
www.microphase.eu
Dc
In the terminals 5 (+9.8V) and 6 (-9.8V) are available auxiliary supplies to power the potentiometer
reference speed. In the attached drawing below is also added a switch that allows the reversal of
the rotation motor speed .
The current capacity of the output is max + /-4mA
9.8V can also be used to enable the converter
2.4
Ausiliary power /-9.8V
Is possible enable the drive connected the START input with +9.8V output "terminal 5"
DRIVE
CNC
The standard drive is furnished in this configuration.
Start enable input has logic range: >+9V to +30Vdc (min/max)
Unconnected Enable input = Drive Not Enabled
Enable Input +24Vdc = Drive Enabled
2.5
Start input
(Signal terminal pin 5-6)
(Signal terminal pin 7)
DRIVE
