Micronics U1000MKII-FM, User Manual

Page: 27 / 56

Micronics U1000MKII User Manual
Issue 3.1 July 19 Page 23
3 MENUS
The password-protected menus allow you to change the default settings:
•
Setup (see page 24)
•
Modbus (see page 25)
–
if Modbus output option installed
•
M-Bus (see page 25)
–
if M-Bus output option installed
•
Current Output (see page 25)
–
U1000MkII-FM only
•
Pulse Output (see page 27)
•
Calibration (see page 28)
•
Volume Total (see page 28)
•
Exit
For troubleshooting purposes, an additional Diagnostics menu is available from the main Flow
Reading or Total Flows screens (see page 29).
3.1 Accessing the Menus
Ensure that the instrument is in Flow Reading , Total Flow , Temperature dT , Total Energy , Instant
Power or Total Flow modes, then press .
Enter 71360 and then press .
The Setup Menu is displayed.
Use and to cycle through the menu sections.
Press to open a menu.
To return to the Flow Reading screen, scroll down to Exit and press .
Within a menu, press to change between two displayed options (the active setting flashes) or,
if there are several options, use and to cycle through the possible values.
Press to confirm a value and display the next setting (or exit the menu if it is the last option).
Sig: 87%
*
246.3
l/min
Enter Password:
*****
User Menu:
Setup