Micron NetFRAME 2100 Series, Product Manual

Page: 87 / 178

1HW)5$0(6HULHV6HUYHU3URGXFW*XLGH
0LFURQ(OHFWURQLFV,QF
In the EMP Password area of the System Management Submenu, type in a password of up to
8 alphanumeric characters. If a beep is heard, the password was not accepted and a different
password must be entered.
EMP Access Modes: Choose either Disabled, Pre-boot, or Always Active, depending on the type of
EMP access needed. The tables above show what is available with a given setting.
EMP Restricted Mode Access: Set Restricted Mode to either enabled or disabled as needed. If in
enabled mode, this means that the EMP Console’s server control options, Power On/Off and Reset,
are unavailable. In disabled mode, these same server control options are available.
EMP Direct Connect/Modem Mode: Select Direct Connect if a null modem serial cable directly
connects the server’s COM 2 port to the EMP Console client machine. If they are connected via a
modem, select Modem Mode.
&RQVROH5HGLUHFWLRQ6XEPHQX
These settings in the Console Redirection Submenu of the Server menu must be set exactly as noted to
be able to use the EMP.
COM Port Address: Select 2F8. This is the COM 2 port that must be used by the EMP. The IRQ#
setting automatically populates with the correct number based on the COM Port Address choice.
Baud Rate: Select 19.2k.
Console Type: Choose PC ANSI.
Flow Control: Choose CTS/RTS + CD.
0DLQ(03&RQVROH:LQGRZ
The main EMP Console window provides a graphical user interface (GUI) to access server control
operations and to launch the management plug-ins from. At the top of the GUI is the menu and tool bar.
These provide the options to initiate plug-ins and other support features. A status bar at the bottom
displays connection information like server name, line status, and mode.