1HW)5$0(6HULHV6HUYHU3URGXFW*XLGH
0LFURQ(OHFWURQLFV,QF
0HPRU\
,QVWDOOLQJ',00V
CAUTION
Use extreme care when installing a DIMM. Applying too much pressure
can damage the socket. DIMMs are keyed and can be inserted in only one
way.
Mixing dissimilar metals may cause later memory failures resulting in
data corruption. Install DIMMs with gold plated edge connectors only in
gold plated sockets.
Refer to memory size and requirements:
1. Observe the safety and ESD precautions at the beginning of this chapter.
2. Open your system.
3. Holding the DIMM only by its edges, remove it from its antistatic package.
4. Orient the DIMM so that the two notches in the bottom edge of the DIMM align with
the keyed socket.
5.
I
nsert the bottom edge of the DIMM into the socket, and press down firmly on the
DIMM until it seats correctly.
6. Gently push the plastic ejector levers on the socket ends to the upright position.
7. Repeat the steps to install each DIMM.
8. Close the system.
9. Connect all external cables and the power cord to the system.
10. Turn the monitor ON and then the system.
OM06417
2
1
3
4
Figure 22. Installing DIMMs
Summary of Contents for NetFRAME 2100 Series
Page 1: ......
Page 178: ...MAS001568 01 6 99 ...
