manualshive.com logo in svg

Micron NetFRAME 2100 Series, Product Manual, Page: 10 / 178

Share
Download
Micron NetFRAME 2100 Series Product Manual Download Page 10

1HW)5$0(6HULHV6HUYHU3URGXFW*XLGH

0LFURQ(OHFWURQLFV,QF

7RREWDLQ2UGHU6WDWXV

1.  Access our Web Site at WWW.MICRONPC.COM and visit the Service and Support page for

online order status.

2.  Telephone our Customer Service department toll-free and wait for the automated order status

prompt with your order reference number.

3.  Telephone our Customer Service department to speak with a representative.  Please have your

order reference number, customer number, serial number, purchase order number, case number,
or the main business telephone number under which your order was placed.

)RULQIRUPDWLRQUHJDUGLQJ5HIXQGVDQG5HWXUQV

1.  Contact our Customer Service department by telephone or E-Mail and request a Return

Merchandise Authorization (RMA) number or a part request number within thirty days from the
date your order was shipped.

2.  Have your order number, customer number, serial number, or case number ready.

+RZ7R&RQWDFW0LFURQ(OHFWURQLFV,QF

Technical Support and Customer Service:

Toll-Free Telephone Numbers

Micron PC:

877-894-5693

Micron Commercial Systems:

877-894-5694

Micron Government Systems:

877-894-5695

   (Outside the U.S. or Canada)

208-343-4893

Micron NetFRAME Server Support

800-249-1178

E-Mail Addresses

Customer Service:

Customer.service@micronpc.com

Micron PC:

CSB.Support@micronpc.com

Micron Commercial Systems:

Commercial.support@micronpc.com

Micron Government Systems:

GovEdu.support@micronpc.com

Micron NetFRAME Server Support:

server.support@micronpc.com

For parts, peripherals or upgrades, telephone MICRON ADDITIONS at 1-888 8MICRON.

Micron wants to make this product guide as useful as possible and welcomes your suggestions and
comments.  Please provide the title, part number and page number of the document and E-Mail your
suggestions to: manuals@micronpc.com.

Summary of Contents for NetFRAME 2100 Series



















































































































































































Reviews:

No comments