manualshive.com logo in svg

Micron NetFRAME 2100 Series, Product Manual

Share
Download
Micron NetFRAME 2100 Series Product Manual Download Page 83

1HW)5$0(6HULHV6HUYHU3URGXFW*XLGH

0LFURQ(OHFWURQLFV,QF

9LHZ

The View menu has the following options:

•

 

SEL Info  Displays information about the SEL.  These fields are display only.

•

 

All Events  Displays the current SEL data from the BMC.

•

 

By Sensor  Brings up a pop-up menu that allows you to view only the data from a certain
sensor type.

•

 

By Event  Brings up a pop-up menu that allows you to view only the data from a certain
event type.

6HWWLQJV

The Settings menu has the following options:

•

 

Display HEX/Verbose  toggles between the Hex/interpreted mode of displaying the SEL
records.

•

 

Output Text/Binary  determines whether SEL data will be saved to the file (as under File
- Save) in binary format or verbose format.

+HOS

The Help menu has the following option:

•

 

About  Displays the SEL Viewer version information.

([LWLQJWKH668

Exiting the SSU causes all windows to close.

1.  Exit the SSU by opening the menu bar item File in the SSU Main window.

  

2. Click 

on 

Exit.

or
Highlight Exit, and press <Enter>.

(PHUJHQF\0DQDJHPHQW3RUW&RQVROH

The Emergency Management Port (EMP) Console provides an interface to the Emergency Management
Port (EMP) called the Console Manager.  This interface allows remote server management via a modem
or direct connection.

The following server control operations available with the Console Manager are:

•

 

connecting to remote servers

•

 

powering the server on or off

•

 

resetting the server

•

 

switching the server console between EMP active and BIOS re-direct modes

The Console Manager uses three management plug-ins to monitor the server:

•

 SEL 

viewer

•

 SDR 

viewer

•

 FRU 

viewer

Summary of Contents for NetFRAME 2100 Series



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands