A few examples of the display report formats:
Total pore volume is calculated and reported if the last data point collected, other than saturation,
was at a relative pressure (P/P
0
) greater than or equal to 0.5000. The Calculations document can
be found on the Micromeritics web page (
). Press
CHOICE
to cycle
through any additional report calculations and error messages.
P
RINT
A
NALYSIS
R
ESULTS
A report is automatically printed if
Printer
is selected as the report destination in
Report Options
. If
not, print a report by pressing
Alt + 6
during or after an analysis.
T
RANSMIT
A
NALYSIS
R
ESULTS
A report can be transmitted through the RS-232 serial port by pressing
Alt + 3
during or after an
analysis. Or
Transmission line
as a report destination can be selected in
Report Options
to have
results transmitted automatically after the analysis.
E-
A
NALYSIS
R
ESULTS
Analysis results can be e-mailed automatically at the completion of an analysis when the Gemini
is connected to a network.
Print Analysis Results
Gemini VII Keypad Operator Manual
239-42801-01 (Rev E) — July 2021
2 - 17
